Crown Trim

A crown trim finishes the area where the wall touches the ceiling. Crown trims are usually some form of a square (as the wall is). This design is very common and has roots back to ancient Greece. They can, though, add a modern touch to the inside of your home. You'll see this kind of trim in bedrooms, living rooms, and dining rooms.

Mid-Wall Trim

Mid-wall trims are not as common as other types of trim, but they can still add pizazz to a room. This trend has a couple of different names, one being "wainscoting" and the other one is "chair rail trimming." This can be a very stylish trend, especially if you incorporate geometric shapes such as hexagons or octagons.

Door Trim

There are two types of door trims: a true door trim, which is a trim that borders around a door, and a doorway trim, a trim which borders around an entryway. Door trims bring character to a room. You'll see door trims on patio doors, shower doors, or garage doors. Doorway trims can be either wide or narrow. When doorway trims are wide, they offer a full preview into the next room, which exposes the layout and gives an illusion of wide, open space.

Floor Trim

You'll find a floor trim where the bottom of the wall meets the floor.Many homes have this detail without giving it any thought. However, just because a room already has one, does not mean you can’t update it. Floor trims stand out when they have painted an accent color, or when they come up higher off the floor. Consult your carpenter to consider different looks that might work for your room. You can have trim consistent throughout the whole home, or choose rooms in which you'd like to add the floor trim to.

Window Trim

Window trims call attention to large windows inside or outside the home. Window trims are not limited to square windows. They can be flattering for Palladian windows, which are half circle windows placed high above doors and on top of square windows. You can choose window trims that are even on all sides or, you can choose trims that are wider at the top or bottom. Some window trims are thick, almost like window sills, while others are thin and neutral-looking.The size of your window trim will depend on your preference and how much room you have around the window. Consult your carpenter for ideas. You can find curtains to match your trims to add extra details.

Trims can take a home from simple to high-end rather easily. What type of trims will you add? The choice is yours.

Author’s short bio: Jason Coke’s extensive 10 year experience in the housing industry, brings a unique vision to the painting industry on how deliver products and services to customers. Mr. Coke’s experience is diverse and includes collaboration with some of the Dallas-Fort Worth Area’s top interior designers and decorators. He also has been involved in construction of homes with one of the nation’s largest home builders. Here at NorTex Painting & Gutters we are passionate about colors, design, service, and people. Our customers trust us to come into their homes and provide not only the services they request, but also expertise and reliable products. We take this opportunity to serve you seriously and value your business.

enter image description hereYou have found the property of your dreams in South Kensington but don’t know how to organise the removals process? Moving house is a time-consuming and stressful job that requires planning and preparation. From packing to informing institutions for your change of address, you will have many to things to consider. You will have a hard time completing every task of the process and you may forget to do something or to take certain aspects of your move into account. That is why we have created this 8-step guide to efficient and successful house removals.

  1. Research

If you have never relocated before you should get familiar with the process and find out what it entails. Research is the key to efficient removals. You need to research the place you are moving to and learn more about its history, cultural events, etc. It is advisable to meet your new neighbours in South Kensington and inform them of the date of your domestic removal. Decide whether you will use a professional man and van service or you will carry out the home removal on your own.

  1. Declutter your home

Before booking with a man with a van company you should get rid of the clutter and reduce the amount of things you will transport to your new home. Sort your belongings and separate the items you will dispose of. It is advisable to recycle the rubbish and reduce your carbon footprint. If the items are not reusable, you should send them for recycling. If your possessions are in good condition and still reusable you can donate them to the people in need. You can make some cash by selling some of the items you no longer need that still have value. Reducing the load means cheaper man and van services in South Kensington.

  1. Make a moving checklist

After you have gotten rid of your unwanted items it is time to create a moving checklist. Make a detailed plan for your move and make a schedule for all the man with a van tasks they need to complete. Find sample moving checklists on the Internet and customise a checklist to meet your specific requirements.

  1. Hire a man and van service

The next step is to choose a man with a van company. Call a few local companies and get quotes. Compare the prices of man with a van firms and the services that different companies can offer. Ask the companies about the things you need to know: insurance, experience, packing services, etc. If you want to get a smooth and hassle-free transition you should take advantage of their packing service. This will cost you more money but you will save yourself time and money. If you decide to pack yourself you need to collect the necessary packing materials and removal boxes.

  1. Get removal boxes and packing materials If you want to lower the man and van cost you should get used removal boxes that are sturdy and in good condition. Visit local supermarkets and grocery stores and ask them if they can provide you with cardboard boxes. There are many websites and forums where you can find used packing materials as many people who have moved recently look for a way to get rid of them quickly and efficiently.

  2. Start packing

Start the packing process at least a month prior to moving day. Packing your house requires time and a lot of effort so you need to give yourself plenty of time to complete the job. Start with the items you won’t need in the next few weeks. Prepare a survival kit and a box of essential items. This box should be the last to pack and the first to unpack in your new home. It should contain items such as bed linen, toiletries, a pair of shoes, clothes and cleaning supplies. These are the items you will need on the first days in your new abode.

  1. Take care of your plants, pets and small children

Keep in mind that most of the man with a van companies will refuse to transport your plants and pets for safety reasons. You need to find proper means of transportation for them or ask your friends in South Kensington to help you relocate them. If you have little children you should find someone to look after them on moving day.

  1. Clean your house before moving out

After everything is set and ready to go, you need to clean your home. Hire an end of tenancy cleaning service and get your deposit back. Now you are ready to settle in your new home in South Kensington.

Follow this guide and you are guaranteed a problem-free and efficient house removal.

References:

Moving Van: Man and Van South Kensington Office Knight Frank: South Kensington Area Guide 33 Moving Tips That Will Make Your Life So Much Easier - BuzzFeed

Having a safe construction site is vital to good working practices. There are a number of tips that you should consider to help make any construction site safer. These tips are easy to implement and will ensure that you abide by health and safety regulation.

Have A Jobsite Hierarchy

Implementing a hierarchy on your jobsite is important particularly if you have subcontractors working on the job. While the subcontractor will know what they need to do, they also need to know about the proper channels of communication. The jobsite hierarchy offers this channel of communication and it is important that all contractors on the site are aware of this.

The structure of the workplace is vital to ensuring that communication reaches the people who need to know. When hiring a subcontractor the hierarchy should be included in communications with the contracts. This allows them time to familiarise themselves with the structure before they arrive on the site. This is something that’s learned from site supervisor safety training and something that makes it very worthwhile.

Have Regular Group Discussions

If there are issues on the site then you need to be able to talk about it. By holding regular discussions any contractor has the opportunity to voice any issues and they will get to know each other better. There are some construction companies that hold these discussions twice a week, while others have them weekly or daily. You should assess your site and determine the frequency based on this.

These discussions are not only about airing any issues on the site, but also about building workplace camaraderie. If your contractors and subcontractors have a poor relationship this will have a negative impact on communication. This could cause a complete breakdown of communication which can also lead to additional problems on the site.

When you have the discussions it is important that everyone is able to communicate what they want. If you have contractors who speak different first languages you have to take this into account. Fernando Aveiga pioneered a solution to this problem which you would be able to implement onto your site to enhance communication.

Have Emergency Updates

If an alarm sounds and no-one knows what it is for most people will stand and wait for someone else to act. It is vital that emergency communication channels are created and that everyone is aware of them. By having emergency updates you can inform contractors what a specific alarm means and what they should be doing when it sounds.

These emergency communication channels will also help if a contractor finds an issue and needs to alert someone. When the contractor knows the communication channel the issue can be brought to the attention of people who need to know and sorted out without having a major impact on the jobsite.

Encourage Checking In And Out

There are many businesses who insist that their guests leave their keys at the front desk. This not only stops people losing their keys, but also ensures that the business knows how many people are in the building at any time. This information is vital if there is an evacuation and everyone needs to be accounted for.

This is something that you should consider implementing on your site, but instead of leaving keys have the contractors check in and out. By doing this you will know how many contractors are on site and you can ensure that you have everyone that you need for the job. Having good check in and out policies can ensure that if your site has to be evacuated that everyone is out and safe.

Misunderstanding and poor communication can slow down a job and cause further issues in terms of workplace safety. It is important that you have good communication channels and that all contractors are aware of them.

The advantages of Nature’s Electric neiLite® LED Tube Lighting

LED tube lighting has a number of advantages when considering replacement of fluorescent tube lighting, but there are a number of factors that should be considered when deciding the best lighting fit for a given application.

Like fluorescent tube bulbs, LED tubes are available in a variety of sizes and formats. Popular lengths are 4' and 8'. Many LED tubes are sold as T8, which describes a slightly smaller diameter tube than typical T12 fluorescents, but either diameter works with standard fluorescent fixture connectors. When selecting LED tubes, it is important to note whether they are described as replacements or ballast compatible. Ballast compatible LED tubes, for example the universal neiLite® 4' LED ballast compatible bulb at http://www.amazon.com/dp/B00E5K1Y38 can be plugged directly into compatible ballast wired fluorescent fixtures. Replacement LED tubes, for example the neiLite® 4' LED replacement bulb at http://www.amazon.com/dp/B00DY2N19S, typically require modest rewiring of the fixture to bypass the ballast, and run line power (commonly 120 VAC) directly to the connections. Rewiring is usually not difficult, but be sure to consult the manufacturer’s wiring instructions. A few universal bulbs, such as the 4' neiLite® model above, can be used in any power configuration - with 120 VAC, magnetic, or electronic ballasts.

While fluorescent and LED tube are shaped similarly, LED tubes typically have a solid back, mounted towards the fixture, and emit LED light downward through a transparent or diffuse cover, providing light over 180 degrees instead of a full 360. Since most of the light directed upwards by fluorescent bulbs is wasteful, LED tubes with lower lumen ratings often provide brighter lighting than a higher listed fluorescent, by directing the light to where it is needed. Perceived brightness can also be affected by the color temperature of an LED bulb. High color temperature values, such as the 6000-6500K CCT provided by the 8' neiLite® replacement tube at http://www.amazon.com/dp/B00DY8IAH0 provide a bluer, more intense light, that provides crisp detail for applications such as shops, warehouses, retail space, and home kitchens and baths. Lower value alternatives provide a more yellow, warm light, that may be more desirable for relaxed home living areas.

LED tubes have a number of advantages over fluorescents. They use much less power to provide the same level of lighting, and do not generate uncomfortable waste heat. Like most bulbs, watt ratings on LED tubes vary, and while wattage does not directly specify light level, higher wattage LED bulbs, such as the 22W neiLite 4' LED replacement tube http://www.amazon.com/dp/B00DY2N19S, are typically brighter than their counterparts. Finally, the lighting quality can be affected by the construction features of the LED tube. LED tubes such as the neiLite examples mentioned above use a diffuser cover which helps scatter the bulb light to fill the room. Clear tube covers can make light too directional, making the individual LEDs visible, and result in shadowed areas.

Whatever your application, there is likely a readily available LED tube light that can replace existing fluorescent lighting at lower operating cost and using less energy, often

As you look over a property that you intend to buy, it is important to spend a significant amount of time checking everything out. A quick, thirty minute visit is simply not sufficient, but this is precisely what many buyers do. Take your time and pay attention to a few important factors before signing on the dotted line.

  1. Is the structure solid?

The need for a surveyor depends on your evaluation of the building, although it is always a good idea to bring someone in to be sure. As you walk around, keep an eye out for large cracks. Small cracks are normal. In particular, pay attention to the areas around bay windows and the places where extensions meet. It is common to see cracks in these areas if the house has an underlying issue. If you are concerned about something you see, bring in a surveyor to quell any doubts that you might have. In addition, if the walls are bowing, have a structural engineer come out to the property.

  1. Is damp present?

If there is damp, you will typically notice a moldy smell. There may also be water marks on the ceilings or walls. As a result, you need to examine these areas closely. In addition, it is okay to be suspicious if you notice a fresh paint job; the owners may be trying to hide an issue with damp.

  1. How is the house positioned?

If there is not much sun out on the day that you visit the home, you may have trouble determining if it faces to the south or the north. However, this is important because you want your home to be bright and warm instead of in the dark all the time. Kay-grant.com who provide Scottsdale homes for sale suggest therefore, bring a compass or use a phone app to figure out which way your potential new home is facing.

  1. Do you have storage space?

Many people forget about storage space until after they move in, but it could very well determine your long term satisfaction with a property. Is there space to store seasonal items that you are not currently using? Do you have a closet to put towels or cleaning supplies? Is there an area where you can put in shelves?

  1. Has staging influenced your decision to buy?

Proper staging is an important strategy for owners. You can put items like mirrors in a space to make it look better or bigger. Be careful when evaluating a property and make sure you are basing your decision to buy on the home itself.

  1. What size are the rooms?

Pay attention to the dimensions of the rooms, not how they look during your walk through. It is not unusual for owners to select small furniture for a space to make it appear big.

  1. Is the roof new?

It costs a lot of money to put on a new roof. A roof can be expected to last about 15 to 20 years, which is not a very long time. In addition, if the roof is flat, determine what sealer was used. A membrane is preferable to gravel and asphalt.

  1. What do the windows look like?

The exterior appearance of the windows can tell you a lot about how the house has been maintained. If the windows are in good condition, the rest of the house may be as well. Check to see if the window frames are rotten or if condensation has built up between the window panes. Both of these are signs of an issue.

  1. Is the plumbing acceptable?

Turn on the taps and see if the water pressure is acceptable. Find out if the pipes are insulated and make sure that lead is not involved. Find out the age of the boiler and check out the radiators. Also, where is the hot water tank? If there is one on the roof, it is probably dated.

  1. How are the power points?

You want good wiring in your home. You also don't want to pay to have a home rewired. Take a look at the fuse board and see what condition it is in. It may clue you in to the condition of the wiring overall.

The housing market in Scotland offers a veritable feast of differing opportunities in terms of home ownership. Resale properties, such as flats and small holdings, through to all manner of new builds are available throughout the country.

These provide the purchaser with a multitude of options to satisfy their requirements. In terms of acquisition, new build properties have become a popular choice for many. However, as with any form of building work, there can be issues which can become apparent after taking possession of a new home. This is why many are now employing the services of suitably qualified surveyors to conduct what is known as a "Snagging survey."

What is a snagging survey?

A snagging survey is a form of house survey. It relates to new build properties and is aimed at picking up all the minor and occasionally major elements of a new build that require fixing prior to the purchaser taking possession of the property. These can include elements such as a door that doesn't quite close properly, other elements in the house that are not functioning the way you would expect, through to external elements of the property. The reality is that the majority of issues picked up during a snagging survey are usually cosmetic and can be repaired reasonably quickly by the builder. However that is not always the case and more serious issues can sometimes be found which require immediate attention.

When do you have a snagging survey conducted?

Typically the most opportune time to have a snagging survey is between the completion of the build and the legal completion date. This provides the builder the opportunity to correct the relevant issues highlighted in the snagging list. In saying that, it is also possible to conduct the snagging survey within the first couple of years of ownership, and the developer usually must repair the elements described in the report.

DIY or professional Snagging survey?

Whilst it is possible in some respects to conduct your own snagging survey, the reasons that most do not, is that a professional surveyor will be able to highlight and pick up elements that you may well miss. This would no doubt have repercussions at a later date. Also the professional surveyor will usually report their findings direct to the developer which increases the chances of getting them fixed much quicker.

What does a snagging survey cost?

When purchasing a new build property, the inherent cost of the property and related legal costs can be substantial. The reality is that in real terms a snagging survey will cost anywhere between £300 to £600. This is a small sum to highlight any potential problems that can be rectified at the appropriate time by the developer at no cost to yourself. Taking into account that any potential problems can be found which could impact the value of the property at a later date, or worse still, require expenditure out of your own pocket to put right, it makes sense to most people to conduct a snagging survey.